Banjo Banjo Bracket Keys, Nuts & Hooks

'T' Wrench / Bracket key for Deering Goodtimes (and banjos with 9/32" bracket nuts). Deering bracket key for adjusting your banjo head tension, or use for changing your banjos head. Excellent quality in hard nickel steel.

A USA quality nickel plated, high tensile steel, round bracket hook and nickel plated brass rounded hexagon nut set to suit notched banjo tension hoops or 'Stretcher band' as they are sometimes called. Please see below for measurements and thread sizes.

A USA quality nickel plated, high tensile steel, round bracket hook and nickel plated brass hexagon nut set to suit notched banjo tension hoops or 'Stretcher band' as they are sometimes called. Please see below for measurements and thread sizes.

A Deering USA quality nickel plated shoe that will accept Deering tension hooks and our Leader USA flat and round 8-26 tpi (.155" / 3.937MM Dia) bracket hooks.The hole in the bracket is approx 3/16" Dia (4.75MM) The shoe comes complete with a 22mm (0.875") long domed head screw and washer for fitting to the banjo rim.

Used for removing/installing banjo heads. A USA quality nickel plated steel T-wrench to fit 1/4" AF hexagon bracket nuts. Fits most Gibson type hexagon nuts.

1/4" AF Box key for adjusting the truss rod in Deering banjo necks.

For Deering higher end open back banjos, from the Sierra upwards ...including Vega open-backs. Deering 5/16" AF bracket key for adjusting your banjo head tension, or use for removing or changing the head on your banjo. Excellent quality in chromed steel.

A correct, 1930s style hook and nut set, heavily nickel-plated. Includes 1/4 hex nut. Designed to fit the standard slotted pre-war style tension hoop. Available as a set of 24 only

Nickel plated T-Shaped bracket wrench. Fits 9/32" hex nuts

A USA quality nickel plated, high tensile steel, round bracket hook to suit notched banjo tension hoops or 'Stretcher band' as they are sometimes called.

From Leader a multi Key for adjusting 6mm AF bracket nuts. Used for tensioning your banjo head ...or removing and fitting a new banjo head on most factory made banjos that have 6mm AF Hexagon nuts. Also has a useful 'star' philips head screw driver for other banjo fitments.

This set will replace those old rusty parts on your banjo, add value and make your banjo look pristine at a minimal cost for a full set of 24 hooks and nuts. A complete set of 24 round tension hooks with 1/4" Gibson style bracket nuts. Nickel plated.The length of the tension hook from the underside of the hooked section to the end of the thread is 39mm (1.535")Please see below for more details and dimensions.

A set of 24 flat hook and nuts for that restoration you've been planning. These slightly shorter than standard hooks will work on many vintage banjos and banjo ukes without having to cut the hooks shorter. See below for detailed dimensions.

Used for removing and installing banjo heads. A USA quality nickel plated steel T-wrench to fit 5/16" AF hexagon bracket nuts. Fits the larger bracket nuts found on many vintage banjos including most Clifford Essex models, Windsor etc.

A USA quality nickel plated, high tensile steel, flat bracket hook and nickel plated brass hexagon nut set to suit early type banjos with grooved tension hoops or 'Stretcher band' as they are sometimes called. Please see below for measurements and thread sizes.

Nickel plated tension hook for Boston, Vega Little Wonder, Vega Bluegrass Wonder & Goodtime banjos.

Zero Glide Replacement Nut Systems borrow the “zero fret” concept to reduce nut friction by 93% increasing tuning stability, playability, and open string tone. Easily installs in minutes with no permanent alteration to your fretted instrument whatsoever.

9/32" AF Rounded bracket nut. Nickel plated, rounded bracket nut for open back Goodtime banjos. Compatible only with Deering flat bracket hooks.

1/4" AF hexagon bracket nut. Nickel plated bracket nut for Deering Sierra and higher end banjos.

Nickel plated round 'J' bolt. Fits Deering,Tenbrooks and higher end Vega banjos.

A Gibson style nickel steel banjo hook complete with hexagon nut, to suit banjos with notched tension hoops. Hook length 68.50mm. Hook diameter 3.90mm. Thread length 25mm

A USA quality nickel plated, high tensile steel, flat bracket hook to suit early type banjos with grooved tension hoops.

A USA quality nickel plated, high tensile steel, flat bracket hook and nickel plated brass rounded hexagon nut set to suit early type banjos with grooved tension hoops or 'Stretcher band' as they are sometimes called. Please see below for measurements and thread sizes.

Nickel plated T-Shaped bracket wrench. Fits 1/4" hex nuts