Banjo Parts & Accessories
The Chicago 2" (50mm) wide strong black webbing adjustable banjo strap with leather ends. Has a black ABS buckle for length adjustment. Comes complete with two genuine leather end attachments, that have genuine silver steel Chicago fastener bolts for easily fixing to your banjo. Has a 'pick pocket' for tenor and plectrum banjo players to store plectrums. There are no metal parts that can harm your banjo. Shortest setting 80cm, longest 132cm.
A much sought after plectrum for ukulele, Ukulele banjo and banjo. Made from hard felt. The ideal 'strumming' pick for that vintage sound. Supplied in a pack of Five Plectrums. Can also be used for soft strumming a guitar.
USA made Brass Fingerpicks by Jim Dunlop. Brass fingerpicks are long lasting and will give you that classic tone. Great for use on guitar, pedal steel, banjo and resonator.
Nickel plated Kershner style tailpiece for 5-string or 4-string banjos. The heavier mass of the Kershner gives plenty of sustain and also allows the tailpiece to sit very close to banjo head. Supplied with fixing screw and hexagon nut.
TGI String winder. Translucent colour (colour may vary). Tough Moulded Design. Suitable for all Machine heads.
Fits most instruments.
Note...This will fit the bigger buttoned rear facing tuning planetary tuning pegs found on some banjos.
Made in the USA, this reproduction five string tailpiece will make your banjo look like it is from the turn of the century. Made from thick 16 gauge raw brass, this tailpiece can handle any banjo string tension. It also features a slotted hole for the tailpiece bolt to accommodate various end bolt designs. Includes a 5/16″ tailpiece bolt and reproduction nut with 8-26 thread.
Supplied with 40mm long hexagon head bolt and nut.
Choose from Nickel, Brass or Aged Brass (note the aged brass can vary slightly in colour/shade as shown)
Golden Gate Flat Picks for fretted instruments have been the choice of leading professionals for over 40 years. Made from the highest quality materials, all edges are hand-beveled to glide effortlessly across the strings.
In Medium gauge
From Leader a multi Key for adjusting 6mm AF bracket nuts. Used for tensioning your banjo head ...or removing and fitting a new banjo head on most factory made banjos that have 6mm AF Hexagon nuts.
Also has a useful 'star' philips head screw driver for other banjo fitments.
Made to be strong so it will last a lifetime and provide great sound.
The 'Minstrel' is a USA made three-footed high quality banjo bridge made from rock maple and tipped with ebony. The string grooves are ready cut and precisely positioned.
Golden Gate NP1 Stainless Steel finger pick. Made in the USA.
Fred Kelly's Large Poly Slick Pick has a flat pick point that enhances smooth strumming. This pick is neither big or bulky, like many on the market, and is the first pick that acts like a flat pick. Available in Medium or Heavy.
With its lightweight and low profile, the G7th Newport banjo Capo allows for fast, accurate capoing with fine tune adjustment – in position – on the fretboard of your instrument.
D'Addario Classic Series cables utilize ultra-pure, oxygen-free copper conductors for low capacitance and pure tone. A single-molded strain relief plug provides durability and worry-free reliability. 90% spiral shielding eliminates virtually all handling noise
The Truss Rod Wrench is a 1/4" socket wrench for adjusting your truss rod on Deering, Vega, and Tenbrooks banjos.
A Truss Rod Wrench is used to adjust the curve of your banjo fingerboard. The length keeps your knuckles safely away from the peghead.
*Not compatible with Goodtime Banjos.
Precision geared Leader machine heads/tuners for ukulele and uke banjo. A set of four (two left & two right hand) high quality tuners in gold finish. This high quality set of tuners has beautiful polished ebony buttons. These tuners can be found fitted to some of the highest quality ukes and ukulele banjos. Complete as shown with hexagon nut ferrules, washers and fixing screws. Please see below for more details.
A professional string winder with built-in string cutter. The ultimate all-in-one restringing tool. Comfortable to hold and easy to use. The pro-winder has an extended handle to increase torque and control. The hardened steel cutting edge clips cleanly and resists wear.The over moulded plastic head grips the pegs securely.
(Note, does not fit the bigger buttoned rear facing planetary tuning pegs found on some banjos)
With all the features of the ‘original’ Paige Capo, the Paige ‘Clik’ Capo goes a step further in it’s speed of use and precision adjustment. You just press the ‘Clik’ button to quickly close the capo, then finally adjust the screw to set a perfect tension to hold down your strings. Press the ‘Clik’ button to quickly release the capo and slide to a new position. Please see below for more details.
Standard Wider Banjo Capo for using above the 5th fret.
Fits past the 4th fret, 1st to 5th Fret.
Paige "Clik" Banjo Capo - PC-B5-1.812
The NEW Deering Smile bridge is finally here. Shaped to fit the natural curve of a banjo head when under tension. Available for 5 string banjos with flat fingerboard only and 2 height options, 5/8" and 11/16" and 5/8" and 11/16" radiused. See below for details.
This Vellum is ideal for replacing an old skin vellum on a banjo up to 11" diameter. It has the surplus edging that is needed for trimming the edges clean after the vellum is fitted. Complete with fitting instructions.
The Fred Kelly Left-Hand Banjo Pickers Set includes a Fred Kelly Left-Handed Poly Slick Pick and a pair of Dr Sherpa Nickel Finger Picks.
Stentor Banjo Peg set of 4 geared tuners and Octave Peg, includes screws.