Banjo Parts & Accessories
Remo 'weather king' banjo heads are made in the USA to exacting standards. The plastic 'head' is moulded onto an aluminium hoop. The 'coated' finish heads are sprayed on the outside to give a 'frosty' look and 'rough' feel. Available in Medium Crown only.
Remo 'weather king' banjo heads are made in the USA to exacting standards. The plastic 'head' is moulded onto an aluminium hoop. The 'coated' finish heads are sprayed on the outside to give a 'frosty' look and 'rough' feel. Available in Medium or High Crown.
Orchestral Stand. Sturdy tripod based orchestra stand adjustable for both height and angle. Extra large desk. Attractive black finish.
Pack of 4 Extra Large Jim Dunlop tortoise plastic fingerpicks. Can be used on almost any stringed instrument, giving the player a warm tonal response and increased control.
Non-slip design won't loosen or turn on thumb while you play. Fits securely without being too tight. When the pick feels too tight or loose around your thumb, simply expand or contract the thumb pick's wrap for the best fit. Adjustments are made quickly and easily without heat or tools.
This set will replace those old rusty parts on your banjo, add value and make your banjo look pristine at a minimal cost for a full set of 24 hooks and nuts. A complete set of 24 round tension hooks with 1/4" Gibson style bracket nuts. Nickel plated.The length of the tension hook from the underside of the hooked section to the end of the thread is 39mm (1.535")Please see below for more details and dimensions.
The Stewart-MacDonald 'Tune Craft' Style 5 String banjo bridge is available in 5/8" (15.87mm) only. It is machined from maple and tipped with ebony. it is pre-notched for 1-11/16" (42.86mm) string spacing
These great tuning pegs are now available as single units rather than a set of four. They provide even tension, turn smoothly, and set the string right where you want it.
These banjo strings are specially designed for use with a Cello Banjo, to create the best tone and playing experience.
- Silver-wrapped nylon for a stunning tone and comfortable playability
- Made in the USA
- Environmentally friendly, corrosion resistant packaging
- String Gauges: .048w, .042w, .034w, .042p
- Loop ended
A high quality round sticker to celebrate our 20th Anniversary (2003 - 2023). 3'' diameter. Will fit nicely on any case!
A pre slotted flat top, classic shaped, banjola bridge blank in solid ebony.
See below for measurements
As used by some of the worlds top banjo players. A sleekly designed, controlled tension capo for the banjo or mandolin. Fits to the 4th fret on a 5-string banjo.
(max. width: 1 7/16") (closed depth: 3/4") (open depth: 1.1/8")
Rugged & gig ready 5-string banjo bag!
For five string open back banjo. Good quality plywood hard case, leathercloth covered, fitted plush lined interior with accessory compartment.
Internal dimensions: Length: 990mm, width: 300mm, depth: 100mm. Headstock width max: 120mm
- Made in the U.S.A
Made in the USA by Pisgah Banjo Company, this iconic bridge is modeled after Pete Seeger’s uniquely styled banjo bridge. It is designed to create more volume and “plunk” without increasing sustain or overtones. It will also never tip over! Choose from 1/2″, 5/8″, 11/16″, and 3/4″ height, all with standard 1-11/16″ string spacing. This bridge is designed to evenly distribute string pressure to all 4 feet. Bridge is 3-D printed from Polylactic Acid (PLA), a biodegradable polymer derived from sugar cane and will eventually biodegrade in 200-300 years. Original bridges were made out of plastic circuit board material! Add some style, tone and options to your banjo arsenal!
Choose from 11/16", 3/4" and 5/8"
A set of 24 Boston Butterly Flange Plates fit the Boston banjos.
Sold as a set of 24 to fit your whole banjo or by single plate depending on it's position.
Choose the option you require.
- Hand made in the UK
At long last Hiscox have now created a world class 5 String banjo case made right here in the UK
With our PRO II specification offering superb protection ideal if you are hitting the road for local gigs or open mic nights.
You can rest assured your precious cargo will be protected on its way.
Please note this is a resonator case which Includes 4 internal side cushions which securely hold 11" or 12" openback banjos.
A graded set of three Fred Kelly Delrin Standard Grip Flat Picks: Delrin is an extremely strong material, however it creates a soft and natural sound on the strings. Designed by Fred Kelly, this pick has a reliable ridged standard grip on both top and underside of the pick, they have a unique fine textured grip and a slight ridge around the thumb area to ensure a firm grasp. A great choice for flat picking Guitar, Banjo, mandolin etc. The set is made up from one of each Light, Medium and Heavy gauges.
Nickel plated, single bracket Deering armrest complete with mounting bolt and bar. For all Deering banjos and other banjos that have 24 brackets / Tension hooks. Simple to fit using a 1/4" AF bracket key. Made of steel, this armrest is comfortable, elegant, and durable.
This Deering Cap features 100% washed cotton twill with a fabric buckle closure with a hidden tuck in. The thick cream stitching gives detail to this 6 panel hat. Perfect for keeping that banjo festival sun from your eyes!
Available in black with cream stitching.
Throw the Monterey strap on your favorite guitar and get in touch with your classic rock side with this retro design. Also works great with a banjo when fitted with the Chicago Banjo converters
Hard-shell Banjo Ukulele case, plush lined with internal compartment.(Fit's the Ozark style Uke Banjo 2037,Countryman Dub 5,Barnes and Mullins UBJ1 etc - Not to be confused with the 'similar looking' mandolin cases)
Wittner Taktell Piccolino Metronome which is pocket size and has a wind up mechanism with a swinging pendulum and tempo range 40 - 208 BPM.
D'Addario Classic Series microphone cables provide the ultimate in quality and value. XLR Male to XLR female connectors. Available in 10 or 25 ft length, choose from options below