Shubb C5n Brushed Nickel Banjo/Mandolin Capo

Shubb is the first choice for many professionals that play 5-string, tenor and plectrum banjos and mandolin. The effective bar length is 1.5 inches with a flat profile. See also Shubb 5th string capo. In Nickel or Brass finish.

The choice of professional banjo players since 1974. This is the 'long scale' original 5th string capo designed by Rick Shubb and precision made in the USA with a fine adjustment thumb screw. Available in Nickel, Brass or Gold plating.

The choice of professional banjo players since 1974. Designed by Rick Shubb and precision made in the USA with a fine adjustment thumb screw. Available in Nickel, Brass or Gold plating.

Shubb C1 Original Shubb Capo. Suitable for most steel strung acoustic guitars. The effective bar length is 2" with a slightly curved profile. Since 1980 the Shubb capo has set the standard against which all others must be measured. It is the first choice ... often the only choice... of more than a million musicians worldwide. The serious guitarist will settle for no less. It is available in nickel or brass.

From aLaska Pik USA, the 'Over the finger, under the nail' PLASTIC finger and thumbnail Pik for stringed instrument pickers; Banjo, mandolin, guitar, autoharp, dulcimer, harp, ukulele etc. These innovative USA design picks can be manicured, clipped and filed to a preferred shape and length. Please see below for user and 'manicure' instructions

Suitable for most steel strung acoustic guitars. The effective bar length is 11/2" with a slightly curved profile. Skips the bass strings and capos the 5th , 4th and 3rd strings.

A new concept in guitar steels ...The stainless steel edge is designed for clean pull-offs. The wood grain provides a good grip for best control. The wooden handle is weighted for proper balance. The contoured top allows your hand to hold the bar in a relaxed, natural position.

Standard Shubb Capo in polished nickel or brass finish. Shubb C2 Suitable for most nylon strung classical guitars. The effective bar length is 21/4" with a flat profile.

This model capo is made specifically for the ukulele! At a glance it looks like the banjo capo, but it closes onto a much smaller neck, and accomodates a slightly wider fretboard. In plain brass finish.

The SP3 was designed by Sally Van Meter for playing bluegrass, or any of today’s demanding slide guitar styles. It’s built for speed, precision, control, and great tone.

A handy little pocket guide that gives you chord or note equivalients when transposing from one key to another.

Capo for Dobro and other guitars set up with a high nut to play with a bar, or 'Hawaiian' style. The classic original design Shubb Dobro Capo in polished brass. There are few dobro capos on the market ...the Shubb is the professionals choice that has stood the test of time. Reliable sturdy construction with precision adjustment. If your string action is at least 3/8" (9.52mm) too high to fret with your fingers, and you play with a bar ...this is the right capo. Use on Dobro, Resophonic, Resonator, or Square Neck Guitar if your action is at least 3/8" (9.52mm) Some used to call high action guitars 'Hound Dog' Guitars! Please See below for more details.