CALTON custom fitted fibreglass Banjo case

When you need to get serious about protecting your pride and joy CALTON fitted fibreglass cases are without doubt the ultimate portable protection solution for your instrument.  

Rugged, well balanced and attractive hard shelled cases with interiors tailored to each instrument. Each half of every Calton case is hand moulded in a single piece, using pigmented resin, with no seams to separate and colour that is integral to the fibreglass (the finish on these cases is the best surface to apply all your freebie stickers we have come across!). All hardware is high quality plated steel, attached to the case with steel rivets and reinforcing plates. Careful attention is paid to the placement of the leather handle in order to provide the optimum in comfort and balance.

A PVC strip completely edges both top and bottom halves of the case. This strong, flexible strip, combined with the natural water repellent qualities of fibreglass, provides an almost perfect seal against the elements.
Case interiors are hand crafted from high quality foam padding, using up to 15 measurements and a template of the instrument. All interior surfaces are finished in crushed velour, and the pickbox is topped with a large foam pad that cushions the neck. The neck is further protected with a padded guide that restricts side-to-side movement.

Exterior colours currently available are: Red, Grey, White, Green, Brown, Blue, Yellow, Burgundy and Black

Calton Case interiors are handcrafted from high quality foam padding, then all interior surfaces are finished in crushed velour. Available custom order interior colour options  are:

Cases can be supplied in the following options;

5-String Banjo Case : for 5-string, plectrum, open back and resonator banjos, will accommodate up to 14 1/2" diameter resonator.

Tenor Banjo Case : for open back or resonator type tenor banjos, with up to 14 1/2" diameter resonator.

Long Neck Banjo Case : in the Pete Seeger old time style.

Open back Banjo case : (seebelow)

All Calton cases are custom orders and will take 2 - 6 weeks from date of order to delivery.