G7th Performance Banjo capo

The newest addition to the G7th family.  

The G7th Performance Banjo Capo will fit banjos, bouzoukis, and mandolin family instruments with flat fingerboards.

The designer, Nick Campling, says...
" I've struggled to find a capo I can live with for the best part of 30 years. They all either pulled my banjo out of tune, were fiddly to adjust, or they got in the way of my hand. Some just didn't work! The G7th Performance Capo is a result of combining my product design skills with my needs as a banjoist".

Some capos can be a constant source of frustration to banjoists ...

They can be awkward to use.
They can pull your banjo out of tune.
They can interfere with the players hand.
Most capos fall into 2 categories.

Non-Adjustable. These capos usually work using a strong spring. They are simple and quick to use, but the spring tension cannot be adjusted, therefore they exert a different tension on each fret, and often cause tuning problems. They can also require a lot of strength to use.

Adjustable. A good adjustable capo is less likely to cause tuning problems. However many are awkward or fiddly to use. Some have only stepped adjustment which is too crude. Others interfere with the players hand.

The new G7th banjo capo has none of the problems of existing capos, but all of the benefits!

To Fit The G7TH Capo To Your Instrument...

Push the lever to release the arms
Fit snugly behind the fret
Squeeze to tighten from above or below
To Remove The G7TH Capo From Your Instrument ...

Simply press the lever to release
Store on your headstock when not in use
This will probably revolutionise the way we think about capos - it is a no hassle solution for banjoists.