Crafter TRV-23/BK Guitar - TRV Series

The soundboard (top) is built from solid sitka spruce and has an attractive multi inlay at the outer edge adjoining the front binding. The round sound-hole has an inlaid rosette in patterns & circles to match the body binding. The fixed rosewood pin bridge has a ‘Corian’ compensated saddle.

The body is cutaway for easier access to the higher fret registers. The Neck Assembly… The mahogany neck has an internally fitted adjustable truss rod. The rosewood fingerboard is fitted with twenty nickel silver frets precisely positioned, honed and polished. Dot markers are inlaid at the 3rd, 5th, 7th, 9th, 12th, 15th & 17th frets …small black side position marker dots are inlaid in the side of the fingerboard. The scale length is 578mm (22 3/4 “) The precisely cut nut is made from cream ABS. The headstock is the familiar ‘Crafter’ design that is found on all ‘Crafter’ guitars, it is faced with rosewood and inlaid with the ‘Crafter’ insignia plus scroll inlay. The truss rod is adjusted from inside the sound hole. A set of single chrome die cast machine heads with chrome buttons are fitted for positive, trouble free tuning.

Finish: Solid Black Gloss.